|
EMMIBOX
Specification:
Works with PeMaster!
- New, very small and good looking design
- USB supplied, no need for other power supply !
- Unlocks nearly all Motorola phones, even new xx.13.xx, xx.7F.xx
firmwares, now works with T192!!
- Detamper any phone in 2 seconds without open the phone, even T192
& Acompli!!
- Flash upload/download for nearly all motorola phones
- Can recover dead phones if it is not hardware problem
- Flex phone, upload/download startup logo as well as melodies,
relock phone to any network
- Read and customize special sim unlock code to any number
- Motokey for RoEmmi2 combatible for more easy use!
For example it works on:
Motorola: c, d, cd: 160, 170
Motorola: d4xx, c, d, cd520
Motorola: cd920, cd930
Motorola: SlimLite
Motorola: StarTAC: 70, 75, 85, 130
Motorola: M3188, M3288
Motorola: M3588, M3688, M3788, M3888
Motorola: V3688, V3690, V2088, V2288
Motorola: "Timeport" L & P Series 7089, 7389
Motorola: T2288 / V2288
Motorola: P2088
Motorola: V50,V51
Remark:
It can't use on new Motorola V50 (fw F0.14.04) directly & there is
also no solution directly to it.
I needs to downgrade the Software Version & Only possible by opening
phone and using testpoint. included the cables:
D560/V3688/T2288/T192.
Prix: xxx euro
MOTOROLA V SERIES CLIP
Functions:
Removes SP (Simlock) and Phonelock from Motorola V series phones.
Supported phones:
V300, V303, V500, V525 and V600
Instructions:
- Be sure the phone battery is fully charged and the simcard is
removed
- Connect 9V battery to Clip
- Power on the v series phone
- plug in the Clip and press the clip button shortly
- Wait few seconds for the phone to enter Boot mode
- Blue LED will blink twice
- Wait few seconds for the phone to restart
- After around 5 seconds phone will restart again
- Wait until you see Insert Simcard again
- Remove clip from phone
- Phone is unlocked
Prix: xxx euro
TEST CARD
Functions: TEST
card motorola pour enlevé les codes securité de vos motorola Acompli
, V series etc ..
|
COMMAND |
RESULT |
|
01# |
EXIT SELF-TEST MODE |
|
19# |
DISPLAY CALL PROCESSOR S/W VERSION |
|
20# |
DISPLAY MODEM S/W VERSION |
|
22# |
DISPLAY SPEECH CODER S/W VERSION |
|
57# |
INITIALIZE NON-VOLATILE MEMORY |
|
58# |
DISPLAY SECURITY CODE |
|
58XXXXXX# |
CHANGE SECURITY CODE |
|
59# |
DISPLAY LOCK CODE |
|
59XXX# |
CHANGE LOCK CODE |
|
60# |
DISPLAY INTERNATIONAL MOBILE STATION EQUIPMENT IDENTITY
(I.M.E.I.) |
Prix: xxx euro
MOTOROLA V-CLIP
Functions:
Unlock SP (Pre-Pay locks)
Reset user code (Phonelock)
Models V300, V400, V5xx and V600
Works in 15 seconds, just press the button, NO partial-flashing !
Prix: 120 euro
user manual
|
